NORSOK D-007 on well testing, clean-up and flowback systems is out on public enquiry
Safe well operations on the Norwegian continental shelf depend on reliable systems for handling and controlling flow from wells. NORSOK D-007 describes requirements for temporary well testing, production clean-up and bleed-off equipment and systems. The standard is now on public enquiry, and Standards Norway invites the industry to comment on the draft until 1 January.
NORSOK D-007 Well testing, clean-up and flowback systems describes the equipment required to ensure a capable temporary installed well completion and surface well testing system, including considerations related to permanent systems used for these types of operations.
NORSOK D-007 is part of the NORSOK D standards that cover drilling and well operations on the Norwegian continental shelf (NCS) to ensure safe and efficient operations. The standards are developed by the Norwegian petroleum industry to ensure adequate safety, value adding and cost effectiveness for existing and future petroleum industry developments in Norway.
Key changes to the standard
During the revision, the document title has been changed to reflect the extended scope of the document; now also covering clean-up and flow-back operations.
There have also been made changes to:
- requirements related to “locked to bottom” operations
- requirements related to flexible flowline
- requirements related to flexible kill line
- information related to the recognition that the surface test tree and the kill hoses have dual well control functions.
Comment on the enquiry draft
You can read the draft through our official enquiry portal.
To access the draft, you will need to sign in. New users will need to register. You can do this at the bottom of this page: kommentere.standard.no
If you already have a registered user in the enquiry portal, you can access the draft directly here:
prNORSOK D-007 Well testing, clean-up and flowback systems
Deadline: 1 January
Contact us
All comments must be made through our enquiry portal by the given deadline.
For further questions, please contact the project manager at Standard Norway,
Per-Thorbjørn Rygh (pry<@>standard.no).